What Goes Into New Window Installation?
Before a new window installation project can begin, it is necessary to remove any window coverings, interior shutters, or hardware from the room. These window trappings can get in the way of installation, and can end up being too expensive to replace. Remove wall hangings and pictures from near windows. They can be damaged or destroyed during the installation process. In some cases, the entire project can require the services of a professional window installation company.
Installing a full-frame replacement window
Unlike an insert window, installing a full-frame replacement window requires that you completely remove the existing window from your home before starting the installation. This is necessary for two main reasons: first, it allows the installer to properly insulate the window, and second, it minimizes air leaks around the window unit. Third, installing a full-frame window requires that you completely remove the old window, so you should consider this option if you’d like to minimize the cost.
The biggest difference between installing a pocket window and a full-frame replacement window is the size of the opening. If you have an identical-size window opening, a pocket installation is likely to work well. However, if your window opening is larger than normal, you should consider installing a full-frame replacement. This option requires you to remove the old window sashes and wood casings, which will result in a smaller glass surface than the original.
Preparing for the project
Before a window installation crew arrives, you should clear a five-foot area around the window. Moving large items, such as dining tables and chairs, can slow down the process, so try to avoid moving them unless it is absolutely necessary. Also, remove plants that may block access. The installer will need to be able to access the window easily, so you should clear any plants from the area. Ideally, you should have a few days to prepare for the new window installation.
Make sure the installation crew has easy access to the house. The contractor will need to move heavy or large windows, so make sure there is enough space to maneuver around them. If possible, remove any furniture or rugs that might impede the installation process. It may also be necessary to move certain pieces of furniture before the installation team arrives. After the removal of furniture, the installers can proceed with the replacement. Make sure the area is free of obstructions, as these can cause damage to the windows.
Cost of labor
Estimates of labor for new window installation vary by size and material. Depending on the size of the window, it could cost from $30 to $50 per hour. Most contractors will charge a flat rate for labor, and they estimate one and a half hours for basic projects. Larger or more complex projects may take up to six hours, depending on the size and configuration. The more complicated the project, the higher the labor cost.
If you are adding a window to an existing wall, the cost will depend on the size of the window, the contractor you hire, and the difficulty of the job. Adding windows to a home’s exterior can increase its value significantly, but the cost of the labor may exceed the cost of the window itself. In addition, if the window is not installed properly, you may find difficulty opening the moving sash, which is a significant drawback.
Steps involved
If you’ve ever wondered what goes into the process of new window installation, consider the following steps. First, you’ll need to remove all window coverings and interior hardware. These things can interfere with the installation process, so you’ll want to remove them before the installers arrive. Also, remove any wall hangings or pictures from near the windows. Once you’ve removed these items, the next step is to prepare your house for the windows.
If you are putting a new window in an old home, you’ll have to cut through your siding or sheathing and drywall. Fortunately, most window installation companies will provide the necessary tools to help you get the job done. However, you can also do the installation yourself, if you’re confident with your carpentry skills. In addition to tools and supplies, you’ll need a few things like nails and a tape measure.